Not all homes rely on well water and septic tanks for water treatment and access. If your home relies on city water, you should understand how your sewer system works and what you can do to maintain it.
These systems work by collecting wastewater from homes and businesses, and delivering it to wastewater treatment plants where it is treated and returned to the groundwater supply to be used again.
On a basic level, pipes lead from individual homes to a “sewer main” line that usually runs down the middle of the street. These lines are generally three to five feet in diameter. When access to the main sewage line is required, sewer covers above ground make it possible.
The main sewer lines continue to lead to larger and larger pipes until they flow into the treatment plant. When possible, the lines operate with help from gravity. When it’s not possible, lift stations or pumps below or above ground may be used to move the wastewater over hills and other natural obstacles.
Once the water enters the treatment center, it’s processed in stages — usually three — before being released back into the environment.
Having a basic understanding of the system may be helpful for proper maintenance and care on a personal level.
Many signs of a sewer line clog are similar to those that accompany septic tank trouble, since the systems serve the same purpose of removing wastewater from the home. They may include:
If you suspect a clog, rapid action is recommended to prevent further damage. One of the first steps is to shut off the water at its source. If you’re unsure of where your shut-off valve is or how to shut off the water, calling a plumber may provide an answer. Turning off the water could help prevent further damage to your system, minimizing repair costs.
After you’ve turned off the water, contact a plumber or your sewage authority.
As with most other home maintenance tasks, prevention and knowledge are important. Take the time today to find your shut-off valve and cleanout line so you’ll be better prepared if an unexpected event takes place.
While understanding how the sewage line works and what to do if trouble should arise are important, regular maintenance is also useful. Remember, prevention matters.
Unlike other systems that you interact with on a regular basis, the sewage line is easy to forget until something goes wrong, and it’s too late.
Residential main sewer lines can back up for a number of reasons, like those previously discussed. Understanding the type of sewer lines that keep your home operational will help in understanding what troubles you may face and learning how to prevent them:
Over time, solids can stick to the tree roots, causing complete blockages. Professional care companies can snake these lines, which is recommended on an annual basis. In some cases, a chemical treatment may be required to destroy roots left behind.
Homes built after the 1970s generally rely on heavy-duty cast iron pipes. These lines require fewer joints than other systems and are extremely strong, making them more resistant to common troubles like tree roots. Unfortunately, no system is perfect. Because the pipes are made from iron, rust and other deposits can form inside the pipe, which can cause blockages over time.
A professional can use a high-pressure water jet to clean the inside of the pipe. In many cases, this is recommended on an annual basis.
Homes built between the 1950s and the 1960s were frequently fitted with fiber conduit sewage lines. Sometimes referred to as “Orangeburg,” these pipes were created using tar and rolled wood pulp.
Like cast iron lines, tree roots rarely affect these lines. However, the deformation of lines does take place over time. Because of the way the lines warp, the sewage flow can be negatively impacted.
It’s important to hire a professional to clean fiber conduit lines. This helps to minimize the effects of deformation until a replacement is required.
To keep your sewer line operating at an optimal level, talk to a local sewer and drainage company to discuss options and create a maintenance program that’s best for your sewer type and budget.
Download all chapters as a PDF.
